Optimization of Sanding Parameters for Surface of Laminated Veneer Lumber of <i>Eucalyptus</i>
Abstract
In order to analyze the relation between wood surface roughness of Laminated Veneer Lumber of Eucalyptus and sanding parameters, an orthogonal experiment and a single factor experiment were performed. The results show that the mesh of the sandpaper has remarkable influence on wood surface roughness of Laminated Veneer Lumber of Eucalyptus, but the feeding speed and sanding thickness don’t; when the mesh of the sandpaper is 150, the feeding speed is 6 m/min and sanding thickness is 0.6 mm during the first sanding and the mesh of the sandpaper is 320, the feeding speed is 9m/min and sanding thickness is 0.2mm during the second sanding, the smallest roughness (Ra) was obtained as 2.45μm. Considering production efficiency, changing feeding speed into 9 m/min, engineering optimization scheme was obtained, and the wood surface roughness (Ra) is 2.70μm.
Reference
Chu Wang Su; Jing Da Huang; Jian Min Zhang; Yi Ren; Ze Kun Wang. (2012). Optimization of Sanding Parameters for Surface of Laminated Veneer Lumber of <i>Eucalyptus</i>. Applied Mechanics and Materials. https://doi.org/10.4028/www.scientific.net/amm.189.21
Explore the literature
Follow references, discover citing works and find related studies.