Mechanical performance of three types of connections used in orthogonal ribbed beams made of poplar laminated veneer lumber
Abstract
This study elucidated the mechanical performance of different connections used in orthogonal ribbed beams made of poplar laminated veneer lumber (LVL). Three types of connections (namely, U-, T-, and L-shape) were fabricated and used to connect the second beam and the middle part of a main beam to form an orthogonal rib beam. A concentrated load was applied to the intersection between the main beam and the second beam. The results showed: (1) all three types of ribbed beam connection specimens showed good connecting performance and the ductile failure, including the pull-out of partial self-tapping screws, crushing of LVL at the end of the ribbed beam, and connection failure; (2) the variation of load capacity of JD2-type specimens was approximately 3.2%, which was smaller than that of the JD1- and JD3-type specimens, slightly less than 10%; (3) the ultimate bearing capacity of a connection specimen was proportional to the number of self-tapping screws; and (4) the mechanical performance of the U-shaped connection specimens was worse than that of the L-and T-shaped connection specimens. The L-shaped connection was recommended due to its better mechanical performance, simpler configuration, and more convenient fabrication.
Reference
Yan Liu; Jing Chen; Hongwei Ma; Meng Gong; Linfeng Zhang. (2022). Mechanical performance of three types of connections used in orthogonal ribbed beams made of poplar laminated veneer lumber. BioResources. https://doi.org/10.15376/biores.17.3.4638-4655
Explore the literature
Follow references, discover citing works and find related studies.