Selected Mechanical Properties of Glue-Laminated Timber Produced from Locally Repaired Timber
Abstract
This study aimed to evaluate the mechanical properties determined in a 4-point bending test of beams made of lumber from which knots had been locally removed and the resulting loss replaced with sound wood. Three sets of beams were prepared, which differed in the number of layers/lamellas and the position of the lamellas from which edge knots were removed. All the lamellas used in the tests were subjected to a modulus of elasticity assessment. In addition to the distribution of defects, it determined the position of a given piece in the beam structure. The tests showed that high mechanical properties could characterise the beams produced in this way, i.e., a modulus of elasticity close to 12 kN/mm2 and a strength above 40 N/mm2, if the lamellas without knots were located below the outer tension lamella. Significantly better results were obtained when PUR glue was used in the inserts rather than MUF. In this case, beams with an improved outer lamella in the tension zone using semi-circular inserts glued with PUR glue had an average strength of 34.6 N/mm2.
Reference
Adam Derkowski; Marcin Kuliński; Adrian Trociński; Sławomir Krzosek; Radosław Mirski. (2022). Selected Mechanical Properties of Glue-Laminated Timber Produced from Locally Repaired Timber. Materials. https://doi.org/10.3390/ma15228112
Explore the literature
Follow references, discover citing works and find related studies.